Looking for professional floor sanding in Stoke-on-Trent? We sand, repair and seal wooden floors across the Potteries and North Staffordshire, from original Victorian floorboards in Hanley and Burslem to oak, parquet and engineered floors in Trentham, Penkhull and Newcastle-under-Lyme. Our sanding systems provide a near 100% dust-free finish, fresh enough to eat off of.
Floor sanding is the quickest, most affordable way to bring tired wood back to life, usually for a fraction of the cost of a new floor. Whether you need one room sanded or a whole house of floorboards, stairs and hallways, our floor sanding specialists give you a fixed-price quote after a free home survey, with no hidden extras and no call-out charge anywhere in the ST postcode area.
Get the numbers you need to plan with confidence—no pressure, just clear and honest pricing.
There are plenty of floor sanding companies in Stoke-on-Trent, but few combine specialist equipment, local knowledge and fixed pricing. With more than 20 years' experience and a written workmanship guarantee on every job, we make floor sanding simple, clean and stress-free.
We'll visit, check your floor type, condition and wear layer, take moisture readings, and give you a fixed-price written quote. No obligation.
Our floor sanding services cover every type of wooden floor found in Stoke-on-Trent homes and businesses. We use commercial-grade sanding machines, not hire-shop sanders, so floors are taken back evenly with no gouges, chatter marks or dips around the edges. Every job includes gap filling, minor board repairs and a full finish, so your floor is ready to use when we leave.
Softwood boards in Victorian and Edwardian terraces, sanded, gap-filled and sealed.
Oak, maple, ash and walnut floors restored to a smooth, flawless finish.
Block floors sanded diagonally for a flat, swirl-free surface.
Engineered floors with a sandable wear layer, measured before we start.
Treads, risers, nosings and handrails detail-sanded by hand.
Shops, offices, schools, churches and halls, with evening and weekend work.
Traditional floor sanding fills the house with fine wood dust. Our dustless sanding equipment captures up to 98% of dust at the sanding head and feeds it into sealed extraction units. That means a cleaner home, less cleaning afterwards, and a safer job for anyone with asthma or allergies. With no dust in the air, nothing settles into the wet lacquer, so the finish is better too.
Floor sanding is our specialist trade, not a sideline. We know the local housing stock: soft pine boards in Shelton terraces, pitch pine in old chapels, and 1930s oak parquet in Trentham and Hartshill semis. We assess every floor first, so we sand only as deep as needed and keep as much timber as possible for the future.
CLEAR PRICING
Floor sanding cost depends on the size of the area, the type and condition of the wood, how much repair work is needed, and the finish you choose. Use our floor sanding cost calculator below to get an instant guide price for your room.
Every quote is fixed price, so the figure we give you after the survey is the figure you pay.
For a typical 15m² living room, the cost to sand and refinish wood floors with a clear lacquer is usually around £300–£450. Floors with lots of old paint, deep stains or board replacements cost more because of the extra preparation. Compared with a new solid wood floor at £60–£100+ per m² fitted, refinishing is usually far cheaper.
Adding a stain usually adds around £3–£6 per m². This covers the extra sanding needed for an even colour, a sample patch so you can approve the shade, and the stain coat itself. Popular choices in Stoke-on-Trent include natural oak, light grey, smoked oak and dark walnut.
Free home survey. No hidden costs. No call-out charge.
PERIOD FLOORS
Thousands of Stoke-on-Trent terraces still have their original floorboards under the carpet. Sanding floorboards brings them back to life and adds real character and value to a period home.
Before we sand, we punch down protruding nails, refix loose boards, and replace any split or rotten boards with matching reclaimed timber. Gaps can be filled with pine slivers or a flexible resin filler, which cuts draughts and stops dirt collecting.
Pine is soft, so it needs a careful hand. Heavy sanding with the wrong grit leaves ridges and cupping that show badly once sealed. We work through the grits gradually and use a multi-disc finishing sander to remove swirl marks. A clear matt lacquer or hardwax oil keeps the warm honey tone without turning it orange.
Solid oak is hard-wearing and can be sanded several times over its life. Sanding oak floors removes scratches, grey patches and old yellowed varnish to reveal the grain underneath. Oak also takes stain evenly, so it's the perfect time to change its colour, from pale natural to smoked or dark oak.
ALL WOOD TYPES
Wood floor sanding works on almost any solid hardwood, whether it was laid last year or a hundred years ago. Foot traffic wears through the finish, dirt is ground into the grain, and furniture leaves dents and scratches. A professional sand removes the damaged top layer, usually less than a millimetre, and leaves a flat, smooth surface ready for a fresh finish.
For a hardwood floor in good structural condition, sanding and refinishing typically adds another 10 to 15 years before it needs doing again. If your floor has deeper problems, such as water damage, missing blocks or rot, our wood floor restoration service covers full repairs before sanding.
Many engineered floors can be sanded, but it depends on the thickness of the real wood top layer.
We measure the wear layer during your free survey and only recommend sanding where it's safe to do so.
BLOCK FLOORS
Parquet and herringbone floors are common in 1930s houses, schools and public buildings across Stoke-on-Trent, and they respond beautifully to sanding. The blocks run in different directions, so a drum sander used the wrong way tears the grain. We sand parquet diagonally at each stage and finish with a multi-disc sander for a flat, swirl-free surface.
We reglue loose blocks, replace missing ones with matching reclaimed timber and remove old bitumen at the edges.
STAIRCASES
Stairs take more wear than any other part of the house, and they're the hardest part to sand properly. Stair sanding is detailed hand-finishing work: compact edge and detail sanders on every tread, riser and nosing, then hand-scraping the corners a large machine can't reach. Spindles, handrails and newel posts can be refinished at the same time.
It's ideal if you've lifted the stair carpet to find original pine or oak treads, or want the stairs to match a newly sanded hallway. Most staircases take one to two days, including finishing.
THE FINISHING TOUCH
The finish protects your floor and decides how it looks every day, so we help you choose the right one for each room. Sanding and varnishing wooden floors is the most popular option in Stoke-on-Trent homes, because modern water-based lacquer is clear, fast-drying, low-odour and tough enough for busy hallways and kitchens. We apply a primer and at least two topcoats, with a light de-nib sand between coats.
Clear, natural colour in matt, satin or gloss. Best for hallways, kitchens and family homes. Very low maintenance; recoat every 8–10 years.
A soft natural sheen that enhances the grain. Best for living rooms, period homes and oak. Spot-repairable; refresh every 2–3 years.
Any shade from pale to dark walnut. Best for changing the colour of your floor, with the same durability as lacquer.
A traditional deep glow for heritage and antique floors. Needs regular buffing to keep its shine.
We use trusted professional products such as Bona and Osmo. Every finish we apply is low-VOC and child- and pet-safe once cured.
STEP BY STEP
From the first visit to the final coat, here's exactly what happens when you book floor sanding with us.
We check the floor type, condition and wear layer, take moisture readings and give you a fixed-price written quote.
Furniture moved by arrangement, skirtings and doorways masked, nails punched and loose boards refixed.
A dust-extracted belt sander removes old varnish, paint and stains, along the grain or diagonally on parquet.
Edge sanders and hand scrapers deal with skirting lines, corners, hearths and thresholds.
Resin filler mixed with your floor's own dust, or pine slivers for wider gaps in floorboards.
Finer grits, then a multi-disc sander for a flat, swirl-free surface ready to finish.
Thorough vacuuming, then your chosen stain, lacquer or oil in several coats, de-nibbed between coats.
A walkthrough of the result, aftercare and drying times. Most floors take light foot traffic within 24 hours.
PROFESSIONAL KIT
Professional equipment means a flatter floor, less timber removed, almost no dust and a faster job, which keeps your costs down.
Lägler Hummel and Bona Belt commercial machines that sand flat and evenly, without the dips hire-shop sanders leave.
The Lägler Flip sands right up to skirting boards and into corners.
The Bona FlexiSand removes swirl marks for a smooth finish, essential on parquet.
Bona DCS units capture dust at source for our dustless sanding service.
Protimeter readings of the timber and subfloor prevent cupping and finish failure.
Compact tools for treads, risers, nosings and tight spaces.
SERVICE AREA
We provide floor sanding across Stoke-on-Trent and up to 20 miles around, including Hanley, Burslem, Tunstall, Longton, Fenton, Stoke, Trentham, Penkhull, Hartshill, Meir and Bucknall. Wherever you are in the ST postcode area, there's no call-out charge.
QUESTIONS ANSWERED
Most floor sanding costs £18–£32 per m², including lacquer or oil, depending on the floor type and condition. Parquet and heavily damaged floors cost more. We give a fixed-price quote after a free survey.
An average room takes one day to sand and seal. A whole ground floor usually takes two to three days, and a staircase one to two days.
Not with our dustless sanding equipment, which captures up to 98% of dust at the machine. There's far less cleaning than with traditional sanding.
Yes. You just need to keep out of the room being sanded and finished. Water-based lacquers are low-odour, and most floors take light foot traffic within 24 hours.
Light furniture can usually go back after 48 hours. Wait about seven days before laying rugs, while the finish fully cures.
Most solid wood and parquet floors can be sanded many times. Engineered floors can be sanded if the wear layer is thick enough, usually 3mm or more. Laminate and LVT can't be sanded.
Yes. We fill gaps with resin filler or pine slivers as part of the job, which also reduces draughts.
We can move most furniture by arrangement. Please clear small items, ornaments and anything fragile beforehand.
Yes. Once the floor is back to bare wood, we can apply a stain in almost any shade. We test a sample patch first so you can approve it.
With a good lacquer, most domestic floors need a full sand every 10 to 15 years. A light screen-and-recoat every few years can extend that.
Yes. We sand commercial floors for shops, offices, schools, churches and halls, and can work evenings or weekends to avoid disruption.
Yes. We're fully insured and every job carries a written workmanship guarantee.
GET STARTED
Ready to bring your wooden floors back to life? Our floor sanding specialists offer dustless sanding, professional finishes and fixed-price quotes across Stoke-on-Trent and North Staffordshire. Book a free home survey today and we'll tell you exactly what your floor needs and what it will cost.
Call: 01782 288590 · Email: admin@woodflooringstokeontrent.com
Visit: 4 Lynam Street, Stoke-on-Trent ST4 7ED · Hours: Monday–Friday, 9am–5pm